Well, it is back. I am trying to record a tape from a tape player on a stereo sytem. My settings are: Windows 7 most recent upgrade.
Playback -- Default device -- Speakers and Headphones IDT HIgh Definition Audio CODEC
Jack Information LR. Left panel 3.5 mm Jack
Levels 49 -- BUt the high shreiking noise is at any level.
Enhancements -- Restored to defaults
Tone Controls -- Restored to zero Really doesn't matter what level they are on
Advanced -- On default 16 bit, 4800 Hz (DVD Quality) Again does not matter, when on (CD Quality) same problem.
Recording Device --- Default device -- Integrated Microphone Array IDT HIgh Definition Audio CODEC
Jack Information -- L R. Top Panel Internal ATAPI Jack
Listen -- Checked Listen to this device.
Levels -- Microphone Array at 52 -- Does not matter what level
Microphone Enhancements -- Disabled -- Again does not matter if enabled or not.
Advanced -- 2 channel, 16 bit, 4800 Hz (DVD Quality) Default
Whether the RCA cable is plugged into the Line in jack Mic or not, the sound from the room comes into the computer and is heard through the internal speakers. And the audio levels are displayed on the Sound Recorder bar.
On top of this, I attepted to do the recording using my Windows 8.1 computer, and I have the same results.
The only way to stop the annoying noise is to mute the Speakers and headphones on both computers. That is not acceptable.
Please help, the high tone shrecching is very annoying.
Thanks, Cheryl